In this blog we will talk about best tips on how to move a spa hot tub. Are you ready to move your hot tub? Great! A hot tub move can be a major undertaking, but it doesn’t have to be a huge hassle. With the right preparation and planning, you can move your spa without any problems.
Follow these best tips on how to move a spa, and you’ll have your hot tub in its new location in no time.
Gather the Necessary Moving Supplies
Gather the necessary supplies before you start to move your hot tub. You’ll need a few items to make sure your move goes smoothly.
- Grab a couple of sturdy dollies, some strong rope or straps, and plenty of thick blankets to cover the spa.
- It’s also a good idea to have a few strong friends on hand who can help you lift the hot tub.
- Make sure you have a few tools, such as a drill, screwdriver, wrench, and any other items you might need.
- It’s also recommended to wear protective clothing and safety glasses during the move.
- Last but not least, check the area you plan to move your hot tub to – make sure there is no furniture or other obstacles in the way.
Prepare Your Hot Tub for Moving
Before you start to move your hot tub, you’ll need to prepare it for the journey.
To begin, you should drain and thoroughly clean your hot tub. Make sure to remove any filters or other items that are attached to your hot tub.
Once the hot tub is empty, you’ll need to remove any remaining water from the pipes. To do this, you’ll need to use a wet vac or a shop vac.
Once the hot tub is completely dry, you’ll need to cover any exposed pipes with packing paper or bubble wrap. This will shield them from any dings or scratches that might happen during the transfer.
Finally, make sure to secure any loose parts on the hot tub, such as knobs or handles, with duct tape. This will help ensure they don’t come off during the move.
Moving a hot tub can be challenging, but following these steps will help make the process much easier.
Measure Doorways and Loading Areas
Measure your doorways and loading areas carefully to ensure the hot tub can fit through them safely. Take measurements from both the inside and outside of the doorways, as well as the driveway or loading area, to make sure the hot tub will fit. It may be necessary to remove some patio furniture or other items to create enough space for the hot tub.
Measure the distance between the doorways, too, so you know how much the hot tub needs to be turned to fit through. If the hot tub needs to be partially disassembled, make sure to measure the pieces separately, so you know they fit through the doorways.
Also, make sure the hot tub is level to prevent any tipping or balance issues. All of this measuring will help you determine the best way to get the hot tub to its new home.
Create a Moving Plan
To ensure a successful move, create a plan that outlines each step of the process, including which tools and people you’ll need.
Start by measuring the size of the hot tub. You’ll need to know the dimensions of the spa to determine how it can be transported. Make sure to measure doorways and loading areas, ensuring that the hot tub will fit
through them.
Then, decide on the best route to take when transporting the spa. Consider any obstacles, like narrow hallways or stairs, and plan how you’ll navigate them.
Finally, plan the actual move. Secure the hot tub, gather the necessary tools, and enlist the help of at least one other person.
Following these steps will ensure a smooth move.
Disconnect Hot Tub Components
Before you begin the move, make sure to disconnect all hot tub components, such as pumps, filters, jets, and hoses, and then pack them up for the move.
Unplug any cords connected to the hot tub and shut off any valves connected to the water.
Disconnect any hoses or tubes from the hot tub and drain the water from the hot tub.
If the hot tub is on a platform, dismantle it and take it apart. Make sure to save any screws and hardware that you take off during the dismantling process.
Finally, remove any covers or lids from the hot tub and wrap them in bubble wrap for protection.
Once all the components are disconnected, you can begin to pack them up for the move.
Drain and Clean the Hot Tub
Your hot tub’s water needs to be drained and cleaned before moving it so that it can stay in good condition.
First, get a pump to empty the water. Make sure to unplug the hot tub before beginning the process.
Next, you’ll need to give the tub a good cleaning. Use a cleaning solution specifically made for hot tubs. Scrub the inside and outside of the tub thoroughly. You’ll also need to empty and clean the filter.
Finally, rinse the hot tub with clean water once you’re done. And remember to dry the tub with a soft cloth afterward.
Moving your hot tub can be a complicated process, but taking the time to drain and clean it properly will ensure it stays in good condition.
Secure and Lift the Hot Tub
Frequently check and double-check that your hot tub is securely lifted and strapped down before moving it. Use a professional mover or rent a truck with a lift gate to safely move your hot tub. Make sure the liftgate is securely strapped to the truck bed before proceeding.
Have more than one person help you lift the hot tub onto the lift gate and secure it with straps. Make sure the straps are tight and the hot tub is firmly in place on the liftgate. Have someone standing at the back of the truck to monitor the hot tub as it’s transported.
When it’s time to unload the hot tub, use the lift gate and straps to lower the hot tub to the ground carefully. Once the hot tub is on the ground, use a dolly to move it into its new spot.
Load the Hot Tub Carefully
Carefully load the hot tub onto the lift gate and secure it with straps. Make sure it’s centered, and all of the weight is balanced. Use a heavy-duty dolly and straps to ensure the hot tub is stable during the move.
If there’s a ramp, use it to move the hot tub up or down any stairs. Once in position, you’ll need to secure the hot tub with straps so it doesn’t move during the transport. You’ll need at least four straps – two on the sides and two on the bottom of the hot tub. Be sure to use a ratchet strap for extra security.
Set up the Hot Tub in Its New Location
Once the hot tub is secure, you’ll need to set it up in its new location. Make sure to bring any tools you may need to assemble the hot tub in its new spot.
Begin by positioning the hot tub on a solid, level surface. If the surface isn’t level, you’ll need to level it using a shovel or similar tool. Use a level to ensure the hot tub is even.
Once it’s level, you can begin setting it up. Read the manufacturer’s instructions to know what needs to be done. If you need help assembling the hot tub, consider hiring professionals.
Fill the hot tub with water, and check for any leaks. If there are any, have them fixed immediately. Once it’s filled, you can add chemicals and test the water to make sure everything is in balance. You may also need to adjust the temperature.
Conclusion
Our expert tips move a spa hot tub can seem like an overwhelming task, but with the right supplies, preparation, and plan, it doesn’t have to be. By following the steps outlined above, you can safely and successfully move your hot tub to its new home. With patience and careful execution, you’ll have your hot tub set up and operational in no time!
