Moving a fridge is a daunting task, but with the right supplies and know-how, you can make it easier. So, if you’re looking for the best tips on how to move a fridge, you’ve come to the right place.
In this article, we’ll show you how to prepare, dismantle, transport, reassemble, level, and plug in the fridge—all without any damage.
Ready to get started? Let’s go!
Prepare the Fridge for Moving
You’ll need to prepare your fridge for moving by cleaning and defrosting it.
To begin, unplug the equipment and take out all food from the fridge. Empty any drawers and shelves, and discard any food that has gone bad.
Next, use a vacuum cleaner to remove any dust and dirt. Then, use a damp cloth to wipe down the outside of the fridge.
To defrost, empty out all the drawers and shelves and switch the fridge off. Allow the freezer to defrost for around 24 hours. Once defrosted, remove any excess water with a cloth or sponge.
Finally, check that all the seals around the door are still intact and make any adjustments if necessary.
With your fridge prepped and ready, you’re now prepared to move.
Gather Supplies and Equipment
Gather the necessary supplies and equipment, such as moving blankets, straps, and dollies, to move your fridge safely. You’ll also need to have a few strong people to help you move the fridge. Make sure everyone involved is aware of the right lifting techniques to prevent injuries.
If you need the right equipment or enough people, it’s better to hire professional movers. Make sure to measure the fridge and the doorways of your new place to ensure it can fit through easily. Also, calculate the path you’ll be taking to make sure there are no turns that could make the move difficult.
Have the supplies and equipment ready before you start the move to make it go as smoothly as possible.
Dismantle and Remove the Fridge
Before attempting to move your fridge, you must first dismantle and remove it.
Start by unplugging the fridge from the wall and moving it away from the wall.
Remove the doors and any shelves or drawers to make the fridge lighter and easier to move.
If the fridge has an ice maker, make sure to disconnect the water line to the wall.
Next, use a dolly and straps to lift and secure the fridge for transport.
Be sure to have someone help you lift the fridge onto the dolly, as it can be very heavy.
After the fridge is securely strapped in, move it to its new location.
Be sure to take your time when moving the fridge and keep it level at all times.
Once at its new destination, reassemble the fridge, plug it back in, and then it’s ready to be used.
Transport the Fridge Safely
Tips to move your fridge safely, follow these steps:
- Secure the refrigerator on a dolly with straps. Use two straps, one across the top and one across the bottom. Make sure the straps are tight enough to prevent the fridge from shifting or sliding off the dolly.
- If you’re using a hand truck, place the refrigerator on the truck by angling it and then pushing it up onto the car. Ensure that the weight of the refrigerator is positioned over the wheels of the car.
- When transporting the refrigerator, please have someone help you as it is quite heavy. This will make the process easier and reduce the risk of injury.
- If you’re driving, ensure that the fridge is securely strapped in and won’t shift during the journey. This will prevent any potential damage to the fridge or other items in the vehicle.
- Upon reaching your destination, carefully move the refrigerator off the truck and onto the floor. Take your time and be cautious to avoid any accidents or damage.
- If you need to move the refrigerator up or down stairs, use a four-wheeler and have two people assist you. Remember to lift with your legs, not your back, to prevent any strain or injury.
Reassemble the Fridge
Once you’ve reached your destination, reassemble the fridge by putting the shelves and doors back in place, and make sure they’re securely fastened. To do this, you’ll need the tools that came with the fridge, such as screws and Allen wrenches.
It’s important to tighten all the screws evenly so the shelves and doors are firmly in place. Make sure the doors are properly aligned and that they open and close without any difficulty. If you notice any dents or scratches, you should fill them with putty or wood filler to prevent rust.
Finally, plug in the fridge and check to make sure it’s working properly.
With these tips, you’ll be able to move your fridge with ease and have it back up and running in no time!
Level the Fridge
You’ll need to level your fridge before you plug it in, ensuring it’s perfectly balanced for optimal performance.
To do this, you’ll need a spirit level or a carpenter’s level. Place the deck on top of the fridge, checking if the bubble is in the center. If it’s not, you’ll need to adjust the legs of the refrigerator until it is.
You can do this by turning the legs clockwise or anticlockwise. Turn them slowly, checking each time with the level until the bubble is in the center.
Once it is, your fridge is now level and ready to be plugged in.
Plug in the Fridge
Once you’ve leveled the fridge, plug it into a nearby power outlet. Make sure the outlet is the correct voltage and current and that the outlet is in good working condition.
Double-check to ensure the plug is firmly connected to the outlet before turning the power back on. If the fridge has a power cord switch, make sure it’s in the ‘on’ position.
Then, plug the power cord into the back of the fridge and turn it on. If the fridge has a water line, you’ll need to connect the water line to the back of the fridge and turn on the water supply valve.
Lastly, wait for the fridge to cool down before you start loading it up with food and drinks.
Now that you have all the necessary supplies and have followed the steps above, you’re ready to move the fridge!
It may take some time, but with the right preparation and patience, you’ll be able with our tips to move your fridge safely and without any major difficulties.
Remember to level the fridge once it’s in its new spot, and remember to plug it in!